- RF AMPLIFIER
- RF POWER GENERATOR
- MATCHING BOX
- RF EQUIPMENT
- RF COMPONENT
- RF SYSTEM
- NMR SPECTROMETER
- NMR EQUIPMENT
- 3-9-2 IMAIZUMI, FUJI, SHIZUOKA,
- 417-0001 JAPAN
- THAMWAY CO., LTD
| IISO9001 acquired. |
 |
| January, 2005 |
| ■BROADBAND NMR POWER AMPLIFIER N146-554AA |
|
This device is designed to act as a high performance power amplifier for Nuclear Magnetic Resonance (NMR). It is an all solid-state high-speed pulse amplifier. |
|
Low noise is achieved by adopting a bias gate system. |
| It can be used to connect CONTROL I/O connector with AMP CONTROL connector of our PROT series as our PROT system. |
|
 |
| Frequency range | 1MHz - 400MHz |
| Output power | 300W/50Ω |
| Input level | 0dBm |
| Power gain | 55dB typ |
| Gain flatness | 4dB |
| Duty | Less than 10% |
| Pulse width | Less than 1ms |
| Input connector | BNC-FEMALE |
| Input/Output impedance | 50Ω |
| Output connector | N-FEMALE |
| Gate pulse input connector (TX1) | BNC-FEMALE |
| Preceding gate input connector (TX2) | BNC-FEMALE (10µs ahead TX1) |
| Input monitor | RF output: -20dB |
| Output monitor | FWD/BWD wave (Digital meter) FWD/BWD wave (RF output: -60dB) |
| Protective Function | Excessive reflection (BWD: >75W) Abnormal temperature (TEMP: Heat sink >60℃) DC supply failure (PS：DC voltage monitoring) EXcessive pulse width (Pulse width: >11ms) |
| Shape | 19 inches JIS rack case |
| Size | W480xH149xD450 (mm) |
| Weight | Less than 12kg |
| Power supply | AC100V 50/60Hz, Less than 1kVA |
| ■BROADBAND NMR POWER AMPLIFIER N146-55ABA |
|
This device is designed to act as a high performance power amplifier for Nuclear Magnetic Resonance (NMR). It is an all solid-state high-speed pulse amplifier. |
|
Low noise is achieved by adopting a bias gate system. |
| It can be used to connect CONTROL I/O connector with AMP CONTROL connector of our PROT series as our PROT system. |
|
| Frequency range | 400MHz - 800MHz |
| Output power | 300W/50Ω |
| Input level | 0dBm |
| Power gain | 55dB typ |
| Gain flatness | 4dB |
| Duty | Less than 10% |
| Pulse width | Less than 1ms |
| Input connector | BNC-FEMALE |
| Input/Output impedance | 50Ω |
| Output connector | N-FEMALE |
| Gate pulse input connector (TX1) | BNC-FEMALE |
| Preceding gate input connector (TX2) | BNC-FEMALE (10µs ahead TX1) |
| Input monitor | RF output: -20dB |
| Output monitor | FWD/BWD wave (Digital meter) FWD/BWD wave (RF output: -60dB) |
| Protective Function | Excessive reflection (BWD: >75W) Abnormal temperature (TEMP: Heat sink >60℃) DC supply failure (PS：DC voltage monitoring) EXcessive pulse width (Pulse width: >11ms) |
| Shape | 19 inches JIS rack case |
| Size | W480xH299xD550 (mm) |
| Weight | Less than 20kg |
| Power supply | AC100V 50/60Hz, Less than 1kVA |