■Variable Frequency of RF Power Generator
      T162-7034AIC     800kHz - 2,999kHz
The T162-7034AIC is a maintenance free, solid state Variable Frequency of RF Power Generator.
The frequency can be set by a switch on the front panel, as a signal generator is built into the Power Generator.
The Power Generator has various built-in protection circuits preventing it from over reflected power, temperature anomalies.

▲T162-7034AIC
Model T162-7034AIC
Frequency range 800kHz - 2,999kHz
Changeover on the front panel switch
Output power 10kW (CW and pulse)
Output connector LC-FEMALE
Load impedance 50Ω
Sprious Less than -20dB
Output power display Progressive wave and reflected wave in front of the control unit
Output power monitor By DC voltage
By RF signals
Protective Function REV OVER: Excessive reflection
TEMP: Abnormal temperatur
DC FAIL: DC supply failure
UNBALANCE: Output unbalance
INTERLOCK: Interlock
MBOX AMC: Panel open or cable not connected
Cooling method Water and some forced air cooling
Power supply AC200V 3φ 50Hz/60Hz
Less than 30kVA
Shape 19 inches JIS rack
Size 570(W)×2,000(H)×850(D) (mm)
Cooling water ・Inlet temp.: Below 25℃
   (Non-condensing)
・Resistivity: Less than 3kΩ/cm
・Inlet pressure: More than 4kg/c㎡
・Coupling: PT1/2
・Amount: More than 15ℓ
Usage environment ・Altitude: Less than 1,000m
・Installation site: Indoor, stationary, no vibration and corrosive gas
・Ambient temp.: 0℃ - 40℃
・Humidity: Less than 90%