| ■DUPLEXER FOR NMR |
|
It is possible to use as a transmit-receive switch when doing NMR scanning.
|
|
Because the leakage of the amplifier power to the receiver side can be reduced when transmitting, the effect on the receiver can be reduced.
|
 |
| ■Low transmission loss |
| ■Low reception loss |
| ■Impedance of all port is 50Ω *1 |
| ■Easy to handle |
| ■500W max (Pulse) *2 |
|
|
| Model | Frequency range (Hz) |
| N120-3034B | 0.5M - 1.5M |
| N120-3044A | 1M - 3M |
| N120-3045B | 2M - 6M |
| N120-3046A | 5M - 15M |
| N120-3046B | 4M - 16M |
| N120-3046C | 3M - 10.5M |
| N120-3056A | 8M - 24M |
| N120-3066H | 10M - 35M |
| N120-3067G | 25M - 75M |
| N120-3067H | 15M - 50M |
| N120-3067I | 20M - 70M |
| N120-3068J | 30M - 100M |
| N120-3078G | 75M - 200M |
| N120-3078L | 50M - 180M |
| N120-3079A | 80M - 240M |
| N120-3089C | 100M - 300M |
| N120-3089K | 150M - 400M |
|
| * The products are also available in other ranges. |
|
*1 The loss increases if the probe has not been adjusted to 50Ω, and it causes damage.
*2 The maximum power changes with the condition of the the pulse width, DUTY and matching of probe, etc.
Example of the Duplexer specifications (N120-3044A)
| Frequency range | 1MHz - 3MHz |
| Input/Output connector | BNC-FEMALE |
| Maximum power | 500W (Pulse) |
| Transmission/Reception loss | Less than 1dB |
| Isolation (Tx-Rx) | 40dB |
| Size | W75xH30xD40 (mm) |
| Weight | 100g |
| ■BROADBAND DUPLEXER FOR NMR |
|
It is possible to use as a transmit-receive switch when doing NMR scanning.
|
|
Because the leakage of the amplifier power to the receiver side can be reduced when transmitting, the effect on the receiver can be reduced.
|
 |
| ■Low transmission loss |
| ■Low reception loss |
| ■Impedance of all port is 50Ω *1 |
| ■Easy to handle |
| ■500W max (Pulse) *2 |
|
|
| Model | Frequency range (Hz) |
| N120-3024A | 100k - 1M |
| N120-3034A | 500k - 4M |
| N120-3046E | 1M - 10M |
| N120-3046F | 2M - 16M |
| N120-3046D | 4M - 32M |
| N120-3066K | 8M - 64M |
| N120-3069A | 30M - 200M |
|
| * The products are also available in other ranges. |
|
*1 The loss increases if the probe has not been adjusted to 50Ω, and it causes damage.
*2 The maximum power changes with the condition of the the pulse width, DUTY and matching of probe, etc.
Example of the Duplexer specifications (N120-3046D)
| Frequency range | 4MHz - 32MHz |
| Input/Output connector | BNC-FEMALE |
| Maximum power | 500W (Pulse) |
| Transmission/Reception loss | Less than 1dB |
| Isolation (Tx-Rx) | 40dB |
| Size | W170xH40xD100 (mm) |
| Weight | 250g |
