■NMR POWER AMPLIFIER (BIAS-GATE PULSE AMPLIFIER)
This device is designed to act as a high performance power amplifier for Nuclear Magnetic Resonance (NMR). It is an all solid-state high-speed pulse amplifier.
Low noise is achieved by adopting a bias gate system.

■PRE-AMPLIFIER
The preamplifier weak NMR signal at the initial stage of NMR scanning.

■DUPLEXER FOR NMR
It is possible to use as a transmit-receive switch when doing NMR scanning.
Because the leakage of the amplifier power to the receiver side can be reduced when transmitting, the effect on the receiver can be reduced.

■HETERODYNE RECEIVER
This is a double heterodyne receiver with low noise and large-signal gain designed for NMR measurement.
It is possible to use it through wideband without adjusting.

■BOXCAR (ANALOG AVERAGER)
The linear time invariant system is characterized by impulse response. If an input signal is periodic and its output signal is convolved with white noise, the N030-1014B can improve S/N by using the periodic signal synchronized with the input signal.

■UNIT TYPE RECEIVER
This receiver is divided into units of ①1'st Amp, ②2'nd Amp, ③PSD, ④DC-Amp, and ⑤REF-phase shifter. The frequency range of each unit can be extended if necessary.
It is very easy to use, and the price is low.

■NMR PULSE GENERATOR
The N210-1026E can set various pulse sequence with software on windows and communicate with a computer using a USB interface.
Because our AD board can be built into same BOX, automatic measurement can be enabled.

■PROGRAMMABLE PULSE GENERATOR
The N210-1026S is suitable for systems that need various pulse sequences, such as NMR, ESR, and supersonic mesurement.
Pulse conditions are set with GP-IB. Set conditions such as pulse sequences and output channnels can be easily confirmed on the LCD color display(640*480) installed on the front panel.

■TCP PROGRAMMABLE PULSE GENERATOR
The N120-1026T is suitable for systems that need various pulse sequences, such as NMR, ESR, and supersonic measurment.
Pulse conditions are set with TCP/IP. The N120-1026T can configure the sutomatic measurement system with external control software. The same commands as the Pulse generator N210-1026S can control the N120-1026T.

■IMPEDANCE ANALYZER
The impedance analyzer is designed for adjusting an NMR probe. Impedance matching conditions can be confirmed on a PC with the included software. Automatic measurement can also be possible owing to a built-in coaxial relay.
This device can be designed with wide range AC power input so that it is usable in any country.

■HIGH-SPEED A/D BOARD
The N230-1425A converts an input analogue signal into a digital signal and calculates it, offering high-speed performance. The N230-1425A communicates with a PC using a USB interface.
The N230-1425A can be built into the pulse generator N210-1026E.

■FERRITE MAGNET NMR SPECTROMETER　-Entry model-
  MAGSIGHT novice
This appliance is nuclear magnetic resonance equipment for proton signal observations in the solution. Ferrite magnet is adopted and it can be used easily. It's assumed to be used for the education which are student experiments mainly.