■Variable Frequency of RF Power Generator   T162-6344C
       (For pulsed outputs)
The T162-6344C is a RF Generator for pulse modulation, which outputs at a maximum 2kW in the 2MHz band.
This Power Generator has three transmitters generating signals whose frequency and power output are independently variable, and its signals can be switched rapidly by an external signal.
For more stable power output, we can offer an optional extra feedback control with high power by connecting tube amplifiers and the Directional Couplers (T051-7944A) to the post-stage of the Power Generator. We can also offer a solid state High Power RF Power Generator by replacing the tube amplifier with the RF Pulse Amplifier for Ion Generator (T146-7844A).

▲T162-6344C   Amplifier unit
▲T162-6344C   Contoroller unit

Model T162-6344C
Frequency range 1.8MHz - 2.2MHz /Settable 1kHz step
Output power Peak: 0 - 2kW, Max duty: 5%
Input pulse voltage 0 - +5V 50Ω (Pulser does not built in)
RF Pulse input Pulse width: 50 - 2,000μs /Stepless
Repeat: 1,2,5,10,15,20,25,50Hz /8 types
Gate input When the gate input and the RF pulse input are input together,
Outputs can be switched to the second frequency.
Interlock gate input Only when the interlock gate is input,
Reflecting excessive protection circuit will operate.
Output power stability ±1%
Matched load 50Ω, Max Reflection=Less than VSWR3
(Max reflected power :500W)
Sprious -30dB以下
Output connector HN-FEMALE
Cooling method Forced air
Protective Function Abnormal stop: Temperature, Unbalance, Reflecting excessive,
  Power failure, Over duty, External interlock (2 systems)
Abnormal reduction (warning): Main amplifier fault indicator,
  Main amplifier fault reflection, Excitation amplifier fault output,
  Excitation amplifier fault reflection
Power supply Amplifier unit: AC210V 3φ 50Hz/60Hz Less than 5kVA
Controller unit: AC210V 1φ 50Hz/60Hz Less than 200VA
Shape 19 inches JIS rack case   2 cases
Size 480(W)×550(H) The spilit into 2 cases×550(D) (mm)