• 3-9-2 IMAIZUMI, FUJI, SHIZUOKA,
  • 417-0001 JAPAN
  • THAMWAY CO., LTD
  • TEL:81-545-53-8965
  • FAX:81-545-53-8978
ISO9001 acquired.
ISO9001 is acquired.
January, 2005

■ IMPEDANCE MATCHING BOX
THAMWAY's MATCHING BOX is a product that takes matches the impedance between RF amplifiers or RF power supplies (impedance: 50Ω) and their loads. The best product is designed and manufactured based on frequency, power output, and load.
The manual matching box is adjusted by controlling C and L on the front panel while monitoring the FWD/REV power meter. When the frequency is wideband, the internal inductance (L) tap is changed and matches.
For automatic matching boxes, an attached controller sends signals to the box, which adjusts automatically.
An FWD/REV meter and a Vpp/Vdc monitor can be added as options.

■Features
Available up to high power(Up to 30kW)
*It depends on load impedance condition
Automatic operation corresponding
Specified frequency

Manual matching box
(Production example)
Frequency13.56MHz
Input power300W CW
Input/Output connectorN-FEMALE
CoolingForced air
ShapeAluminum case
Size260(W)x133(H)x280(D)(mm)
(excluding protrusions)
Automatic matching box
(Production example)
Frequency13.56MHz
Input power500W CW
Input connectorN-FEMALE
Output connectorCopper plate
CoolingForced air
ShapeAluminum case
Size350(W)x125(H)x300(D)(mm)
(excluding protrusions)
   
・A matching box controller is necessary to automatic impedance matching box.
・When buying it at the same time with a RF power generator,
    it can have a impedance matching box controller built-in.